Received the boards this week. Built one for my self!!
If you are programming AVR IC’s, you might set the fuses wrong “bricking” the chip. High Voltage programming is then required to reset the fuses to a known state. There are several solutions on the web of building your own. I came across this site : https://sites.google.com/site/wayneholder/attiny-fuse-reset-with-12-volt-charge-pump with a very nice circuit.So all the credits should go to Wayne as it is his design. I just turned it into an Arduino Shied.
Simple, no extra 12V as it is generated onboard in combination with software. I built this shield based on this design. You can simply make it a single sided PCB but keep in mind that you will have to put some tape on the bottom to avoid a short with GND (USB Connector).I designed it with simple straight through components making it easy for anyone to assemble.
I have added a pdf with the schematic and PCB layouts. And if there is enough interest I can have them professionaly made. I will need at least 8 to order to make it worthwhile.
Total costs (including shipping) would be (2014 price):
- Netherlands : € 7.50.
- International: € 9.00 or US$ 11.00.
It won’t make me rich 🙂 Just a couple of beers for the effort.
If you want to order one, send me a mail (email@example.com) or if you want the parts included or fully built let me know. For a kit or fully built it will cost a little more. If you wish it in SMD that also is possible. Anything is possible I suppose 🙂
PDF file: ATTiny_HV_FuseReset_Binder
HI, I like your circuit board for the HV fuse resetter.
Are these boards still available, since this post is from 2015, some 5 years ago?
Apologies for the late response. But if you are still interested you can mail me at nico dot verduin at ziggo dot nl
i found you in the web.
I have a great problem with wvc 260a inverters.
I bought them in china.
I want to monitor them over power line communication. Software is ok. But i only got data from one inverter.
But now i got information from the seller, what the reason is.
All inverters have the same number.
So only one number can be found.
They must have different numbers to be found over plc.
Do you know a way to change the numbers in the inverters, so that the monitoring software can sear different inverters?
I dont know, which hardware and software i need, to change these numbers.